COMPUTER MODULES, INC. BBU-IR1, BBU-IR5 Card Type Battery pack I/O Options DC power out Data Bus N/A (see technical note) [Image] CONNECTIONS Function Label Function Label 9V DC power out to P4 Battery test switch SW1 Turbodisc BATTERIES Power Bank 0 Bank 1 Bank 2 Bank 3 Bank 4 500mAh (6) 1.5V NONE NONE NONE NONE AA 1000mAh (6) 1.5V (6) 1.5V NONE NONE NONE AA AA 1500mAh (6) 1.5V (6) 1.5V (6) 1.5V NONE NONE AA AA AA 2000mAh (6) 1.5V (6) 1.5V (6) 1.5V (6) 1.5V NONE AA AA AA AA 2500mAh (6) 1.5V (6) 1.5V (6) 1.5V (6) 1.5V (6) 1.5V AA AA AA AA AA Note: Ni-cad batteries must be used. If other types of batteries are used the hardware or batteries could be damaged. DIAGNOSTIC LED(S) LED Color Status Condition LED1 Green On Board has sufficient charge to power Turbodisc LED1 Green Off Board does not have sufficient charge to power Turbodisc LED2 Green On Batteries are receiving power from Turbodisc AC adapter for charging LED2 Green Off Batteries are not receiving power from Turbodisc AC adapter for charging Note: These LEDs will only function when the battery test switch is pushed. MISCELLANEOUS TECHNICAL NOTES This card has no connectors on its card edge. It can therefore be installed in any 16-bit format card slot. It provides battery backup power for the Computer Modules, Inc. Turbodisc, document number V2116.